Hombre S Space Cab 2WD V6-4.3L (2000)
Front Door Window Motor: Service and Repair
Removal Procedure
CAUTION: Do not attempt to service the regulator motor without releasing the counterbalance spring tension. The regulator lift arm is under tension
from the counterbalance spring and can cause personal injury if the motor is removed from the regulator.
1. Remove the window regulator. Refer to Window Regulator Replacement - Front Door.
2. Drill a hole through the window regulator and the sector gear.
3. Install a bolt and a nut through the hole in order to lock the sector gear in position.
4. Drill out the rivets that secure the power window motor to the window regulator.
5. Remove the power window motor from the window regulator.
Installation Procedure