Hombre S Space Cab 2WD V6-4.3L (2000)
Paint: Application and ID
Anti-Corrosion Treatment and Repair
CAUTION: When applying sound deadeners, or anti-corrosion materials due care and preventative measures must be exercised to prevent any material
from being sprayed into door and quarter panel mechanisms such as door locks, window run channels, window regulators and seat belt retractors, as well
as any moving or rotating mechanical or suspension parts on the underbody, particularly the parking brake cable. After material application, be sure that
all body drain holes are open. Improper application may increase chance of corrosion damage or limit the operation of moving parts, resulting in
personal injury.
CAUTION: Foam sound deadeners must be removed from areas within 152.4 mm (6 in) of where flame is to be used for body repairs. When
reinstalling foam sound deadeners, avoid inhaling fumes as bodily injury may result.
CAUTION: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.
NOTE: The anti-theft label found on some major body panels MUST be covered before performing any painting, rustproofing or undercoating
procedures. The mask must also be removed following those procedures. Failure to follow these precautionary steps may result in liability for violation
of the Federal Vehicle Theft Prevention Standard, and subject the vehicle owner to possible suspicion that the part was stolen.
Anti-corrosion materials providing rust resistance are used on the interior and the exterior surfaces of the metal panels. These materials include the
following metals:
-
One-sided galvanized zinc
-
Two- sided galvanized zinc
-
Zinciron alloy steels
These treated metals are used on the following components:
-
The fenders
-
The doors
-
The quarter panels
-
The rocker panels
-
The lids
-
The floor pans
-
The wheel housings
-
Other critical parts
