Hombre S Space Cab 2WD V6-4.3L (2000)
Wheel Cylinder: Service and Repair
Removal and Installation
Removal Procedure
1. Remove the brake shoes. Refer to Brake Shoe Replacement.
2. Disconnect the brake pipe.
3. Remove two bolts.
4. Remove the wheel cylinder.
Installation Procedure
1. Install the wheel cylinder.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts.
Tighten
Tighten the bolts to 13 Nm (115 inch lbs.).
3. Connect the brake pipe to the wheel cylinder.
Tighten
Tighten the brake pipe fitting to 21 Nm (16 ft. lbs.).
4. Install the brake shoes. Refer to Brake Shoe Replacement.
5. Bleed the brake system. Refer to Hydraulic Brake System Bleeding.
