Hombre S Space Cab 2WD V6-4.3L (2000)
6. Remove the caliper mounting bolts.
7. Remove the caliper.
Inspection Procedure
1. Inspect the mounting bolts and sleeves for corrosion. Do not polish away any corrosion.
2. Replace corroded mounting bolts and sleeves.
Installation Procedure
Important: Lift the inner edge caliper boot next to the piston. Press out any trapped air. The boot must lay flat below the level of the piston face.
1. Lubricate the sleeves and bushings with silicone brake lube.
2. Install the bushings and sleeves in the caliper.
