Hombre S Space Cab 2WD V6-4.3L (2000)
Cruise Control Module: Service and Repair
Removal Procedure
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable.
2. Disconnect the cruise control cable. Refer to Cruise Control Cable Replacement (2.2L) or Cruise Control Cable Replacement (4.3L).
3. Disconnect the electrical connectors, as necessary.
4. Remove the 3 nuts that retain the cruise control module to the mounting bracket studs.
5. Remove the cruise control module from the mounting bracket.
6. Remove the 3 screws that retain the mounting bracket to the cowl panel.
Installation Procedure
NOTE: Refer to Fastener Note in Service Precautions.
1. Install the mounting bracket to the cowl panel with the 3 screws.
Tighten
Tighten the screws to 4.5 N.m (40 lb in).
2. Install the cruise control module to the vehicle.
3. Install the 3 nuts that retain the cruise control module to the mounting bracket.
Tighten
Tighten the nuts to 9.0 N.m (6.6 lb ft).
