Hombre S Space Cab 2WD V6-4.3L (2000)
2. Position the engine wiring harness.
3. Connect the CKP sensor electrical connector (2).
4. Install the engine wiring harness and the bolt (3) to the generator mounting bracket.
Tighten the engine wiring harness bolt to 25 Nm (18 ft. lbs.),
5. Position the heater hoses.
6. Install the heater hoses in the retainer above the valve rocker arm cover.
7. Install the EVAP canister purge solenoid valve.
8. Connect the spark plug wires to the spark plugs for the right side of the engine.
9. Install the PCV tube to the air cleaner outlet duct and the valve rocker arm cover.
