Hombre S Space Cab 2WD V6-4.3L (2000)
Oil Pressure Sender: Service and Repair
Removal Procedure
^
Tools Required
-
J41712 Oil Pressure Switch Socket
1. Remove the distributor.
2. Disconnect the engine oil pressure gauge sensor electrical connector.
3. Hold the engine oil pressure gauge sensor fitting with a wrench.
4. Remove the engine oil pressure gauge sensor using the J41712.
Important: Note the alignment of the engine oil pressure gauge sensor fitting prior to removal.
5. Remove the engine oil pressure gauge sensor fitting, if necessary.
Installation Procedure
^
Tools Required
-
J41712 Oil Pressure Switch Socket
Notice: Refer to Fastener Notice in Service Precautions.
