Hombre S Space Cab 2WD V6-4.3L (2000)
Timing Cover: Service and Repair
Removal Procedure
1. Remove the engine oil pan.
2. Disconnect the Crankshaft Position (CKP) sensor electrical connector.
3. Remove the crankshaft balancer.
4. Remove the water pump.
5. Remove the CKP sensor.
6. Remove the engine front cover.
7. Discard the engine front cover.
8. Clean all sealing surfaces.
Installation Procedure
Notice: Do not reuse the engine front cover. Oil leaks may result.
1. Install the NEW engine front cover.
2. Install the CKP sensor with a NEW seal (O-ring).
3. Install the engine oil pan.
4. Connect the CKP sensor electrical connector.
5. Install the water pump.
6. Install the crankshaft balancer.