Hombre S Space Cab 2WD V6-4.3L (2000)
1. Sub-assemble the bolts, spark plug wire shields, and NEW gaskets to the exhaust manifold. The stud installs in the front hole.
2. Ensure that the exhaust manifold bolts are held in place by the tabs on the exhaust manifold gaskets.
3. From under the hood position the exhaust manifold by the engine.
4. Raise the vehicle to the proper height.
5. Working the wheelhouse opening install the exhaust manifold.
6. Connect the spark plug wires to the spark plugs.
7. Install the fender wheelhouse extension.
8. Install the front tire and wheel.
9. Raise the vehicle.
10. Connect the exhaust pipe to the exhaust manifold.
11. Lower the vehicle.
12. Connect the EGR valve inlet pipe to the exhaust manifold.
Tighten the EGR valve inlet pipe nut to 30 Nm (22 ft. lbs.).
