Hombre S Space Cab 2WD V6-4.3L (2000)
4. Reconnect the turn signal and multifunction switch assembly connector to the SRS coil assembly connector.
5. Attach the wire harness assembly (1) to the steering column wire harness strap (2).
6. Install the upper and lower shrouds.
Column Shift
Disassembly Procedure
1. Remove the upper and lower steering column shrouds.
2. Remove the wire harness assembly (1) from the wire harness strap (2).
3. Disconnect the turn signal and multifunction switch assembly connector from the SRS coil assembly connector.
4. Slide the 2 connectors (2) of the turn signal and multifunction switch assembly out of the bulkhead connector (1).
