Hombre S Space Cab 2WD V6-4.3L (2000)
Turn Signal Cancel Cam: Service and Repair
Turn Signal Cancel Cam, Bearing Thrust Washer
Floor Shift - Standard Column
Disassembly Procedure
Tools Required
J 23653-SIR Lock Plate Compressor
Important: Let the SRS coil assembly hang freely after removal.
1. Remove the SRS coil assembly. Refer to Restraint Systems.
Compress the shaft lock shield assembly (2) using J 23653-SIR.
2. Remove the bearing retainer (1) from the steering shaft assembly.
3. Discard the bearing retainer (1).
4. Remove J 23653-SIR from the steering shaft assembly.
5. Remove the following parts from the steering shaft assembly:
^
The shaft lock shield assembly (4)
^
The turn signal cancel cam assembly (3)
^
The upper bearing spring (2)
^
The thrust washer (1)
Assembly Procedure
Tools Required
J 23653-SIR Lock Plate Compressor