Hombre S Space Cab 2WD V6-4.3L (2000)
1. Install the following parts onto the steering shaft assembly:
^
The thrust washer (1)
^
The upper bearing spring (2)
^
Lubricate the turn signal cancel cam assembly (3) with lithium grease
^
The turn signal cancel cam assembly (3)
^
The shaft lock shield assembly (4)
2. Compress the shaft lock shield assembly (2) using J 23653-SIR.
3. Install the new bearing retainer (1) onto the steering shaft assembly.
4. Firmly seat the bearing retainer (1) into the groove on the steering shaft assembly.
5. Remove J 23653-SIR from the steering shaft assembly.
6. Install the SRS coil assembly.
Column Shift - Standard Column
Disassembly Procedure
Tools Required
J 23653-SIR Lock Plate Compressor
Important: Let the SRS coil assembly hang freely after removal.
1. Remove the SRS coil assembly. Refer to Restraint Systems.
