Hombre S Space Cab 2WD V6-4.3L (2000)
^
The lower brass surface of the turn signal cancel cam assembly (4)
2. Install the following parts onto the steering shaft assembly.
1. The inner race (1)
2. The upper bearing inner race seat (2)
3. The upper bearing spring (3)
4. The turn signal cancel cam assembly (4)
5. The shaft lock shield assembly (5)
3. Compress the shaft lock shield assembly (2) using J 23653-SIR.
4. Install the new bearing retainer (1) onto the steering shaft assembly.
5. Firmly seat the bearing retainer (1) into the groove on the steering shaft assembly.
6. Remove J 23653-SIR from the steering shaft assembly.
7. Install the SRS coil assembly. Refer to Restraint Systems.
