Hombre S Space Cab 2WD V6-4.3L (2000)
The scan tool displays the seconds left before the BCM turns the RAP relay OFF. The BCM uses this feature to allow the operation of the radio and the
power windows for up to 1198 seconds (approximately 20 minutes), after the ignition is turned OFF. After the time has elapsed or the door is opened
the BCM will open the ground circuit for the RAP relay.
Vehicle Speed
The scan tool displays the speed the vehicle is traveling. The BCM uses this data for the automatic rolling door lock and the turn signal reminder
features.
Input 1
Cargo Lamp Switch
The scan tool displays the state of the switch. The scan tool displays ON when the cargo lights are requested by activation of the switch.
Door Handle Switch
The scan tool displays the position of the door handle. The scan tool displays ACTIVE when a door handle is raised and INACTIVE with all doors
closed and the door handles at rest.
Door Lock Relay Feedback
The scan tool displays the state of the door lock relay. The scan tool displays ON when the BCM senses the door lock relay coil is energized.
Drivers Door Jamb Switch
The scan tool displays the position of the drivers door. The scan tool displays ACTIVE when the drivers door is open.
Horn Relay Input
The scan tool displays the state of the horn relay. The scan tool displays ACTIVE when the BCM senses that the horn relay is being commanded ON by
the relay coil circuit being grounded.
Ignition 1
The scan tool displays the position of the ignition switch. The scan tool displays ACTIVE when the ignition switch is in the RUN or CRANK position.
Ignition 3
The scan tool displays the position of the ignition switch. The scan tool displays ACTIVE when the ignition switch is in the RUN position only.
Ignition Power Mode
The scan tool displays the position of the ignition switch. The scan tool displays OFF, RUN, CRANK and UNKNOWN. The UNKNOWN display is
when the BCM can not determine the position of the ignition switch (between the OFF and RUN positions).
Key In Ignition
The scan tool displays the position of the ignition key in the ignition switch cylinder. The scan tool displays YES when the ignition key is fully inserted
into the ignition switch cylinder. The BCM uses this data in controlling the operation of the reminder chime feature.
Park Brake Switch
The scan tool displays the position of the park brake pedal. The scan tool displays SET when the park brake is depressed (switch closed). The BCM uses
this data in controlling the operation of the park brake indicator, the reminder chime feature and the headlamp/DRL system.
Passenger Door Unlock Input
The scan tool displays the state of the passenger door unlock relay. The scan tool displays ACTIVE when the BCM senses that the passenger door
unlock relay is being energized.
Retained Accessory Power (RAP) Relay Feedback
The scan tool displays the state of the RAP relay. The scan tool displays ON when the BCM activates the RAP relay.
Seatbelt Buckled
