Hombre S Space Cab 2WD V6-4.3L (2000)
Crankshaft Position Sensor: Service and Repair
Removal and Installation
Removal Procedure
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
Important: The CKP System Variation Learn Procedure will need to be performed whenever the Crankshaft Position (CKP) sensor is removed or
replaced. Refer to CKP System Variation Learn Procedure.
1. Disconnect the negative battery cable.
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. If the vehicle is equipped with the underbody shield package, then remove the steering linkage shield mounting bolts.
