Hombre S Space Cab 2WD V6-4.3L (2000)
9. Remove the VCM access cover.
Important: Since the knock sensor (KS) module will be used in the replacement VCM, place the module in an area where it will not be
damaged.
10. Gently pinch the retaining clip and pull upward to remove the KS module.
Installation Procedure
Important: Ensure that the VCM being installed is the original VCM, or that the replacement VCM service number is identical to the
original VCM service number.
Steps 1 - 4 are only necessary for a replacement VCM installation:
NOTE: Refer to PCM and ESD Note in Service Precautions.
1. Align the notches of the KS module with the notches in the socket.
Important: Press only on the ends of the KS module. Gently press on the KS module until it is firmly seated in the socket. Listen for the click.
