Hombre S Space Cab 2WD V6-4.3L (2000)
Vehicle Speed Sensor: Service and Repair
Manual Transmission - NV 3500
Removal Procedure
1. Raise the vehicle.
2. Remove the electrical connector from the vehicle speed sensor.
3. Remove the following parts:
1. The bolt
2. The vehicle speed sensor
3. The chamfer seal
Installation Procedure
1. Coat a new chamfer seal with a thin film of transmission oil. Use Synchromesh Transmission Fluid or the equivalent.
2. Install the following parts:
1. The chamfer on the vehicle speed sensor assembly
2. The vehicle speed sensor assembly
3. The bolt
