Hombre S Space Cab 2WD V6-4.3L (2000)
Installation Procedure
Important: Each injector is calibrated for a specific flow rate. Order the correct injector for the application being serviced when replacing the fuel
injectors.
1. Lubricate the new injector O-ring seals with clean engine oil (2).
2. Install the O-rings on the injector assembly (2).
3. Install the fuel injector assembly (12) into the fuel meter body injector socket.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the injector assembly retainer (11) and the injector retainer lock nuts (10).
Tighten:
Tighten the injector retainer lock nuts to 3.0 N.m (27 lb in).
5. Install the fuel meter body assembly. Refer to Fuel Meter Body Assembly Replacement.