Hombre S Space Cab 2WD V6-4.3L (2000)
Installation Procedure
CAUTION: In order to reduce the risk of fire and personal injury, before connecting fuel pipe fittings, always apply a few drops of clean engine oil to
the male pipe ends.
1. This will ensure proper reconnection and prevent a possible fuel leak. During normal operation, the O-rings located in the female connector will
swell and may prevent proper reconnection if not lubricated.
2. Apply a few drops of clean engine oil to the male fuel pipe end.
3. Push both sides of the quick-connect fitting together in order to cause the retaining tabs/fingers to snap into place.
4. Once installed, pull on both sides of the quick-connect fitting in order to make sure the connection is secure.