isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Sensors and Switches - Fuel Delivery and Air Induction > < Idle Air Control Valve <--> [Idle Speed/Throttle Actuator - Electronic]|Removal and Installation|Page 2731

Hombre S Space Cab 2WD V6-4.3L (2000)

Page 1
background image

Fuel Pump Relay: Service and Repair

Removal Procedure

CAUTION:  Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Remove the underhood electrical center cover.
3. Remove the fuel pump relay (the location is indicated on the electrical center cover).

Installation Procedure

1. Install the fuel pump relay (the location is indicated on the electrical center cover).
2. Install the underhood electrical center cover.
3. Connect the negative battery cable.

Sensors and Switches - Fuel Delivery and Air Induction > < Idle Air Control Valve <--> [Idle Speed/Throttle Actuator - Electronic]|Removal and Installation|Page 2731