Hombre S Space Cab 2WD V6-4.3L (2000)
housing.
2. Remove the new distributor cap, if necessary.
3. Align the rotor with mark made at location (2).
4. Guide the distributor into the engine.
5. Align the hole in the distributor hold-down base over the mounting hole in the intake manifold
As the distributor is being installed, observe the rotor moving in a clockwise direction about 42 degrees.
Once the distributor is completely seated, the rotor segment should be aligned with the mark on the distributor base in location number (1).
-
If the rotor segment is not aligned with the number (1) mark, the driven gear teeth and the camshaft have meshed one or more teeth out of
alignment.
-
In order to correct this condition, remove the distributor and reinstall it.