Hombre S Space Cab 2WD V6-4.3L (2000)
5. With the gear in this position, the rotor segment should be positioned as shown for a V6 engine (1) or V8 engine (2) If not, replace the distributor.
6. Remove the two screws from the rotor.
7. Remove the rotor.
8. Note the locating holes that the rotor was removed from
-
The rotor screw holes (1).
-
The rotor locator pin holes (2).
9. Remove the two screws that hold the camshaft position (CMP) sensor.
