Hombre S Space Cab 2WD V6-4.3L (2000)
3. Install the engine oil pressure sender with a J 35748 Oil Pressure Sending Unit Socket.
Tighten:
Tighten the sender to 30 N.m (22 lb ft).
4. Connect the engine oil pressure sensor harness connector.
Important: The proper CKP/CMP correlation will be lost if the rotor is not reinstalled in the same exact position. A DTC P1345 will result from
improper distributor shaft alignment.
5. Align the rotor in its original position in relation to the distributor base (1).