isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Body Control System Description|Page 1573 > < Body Control System Description|Page 1571
Page 2
background image

The RAP feature allows the power windows and the radio to be operated after the ignition switch is turned from the RUN position to the LOCK position.
This feature is operable only if the battery voltage is above the minimum voltage threshold when the ignition switch is turned to the OFF position. The
power windows and the radio will be turned OFF when any door is OPENED or after 20 minutes have elapsed since the last ignition cycle.

Illuminated Entry

Interior lights will illuminate for 15 seconds under any of the conditions listed below:

-

Lift and release the drivers door handle.

-

Lift and release the passenger door handle.

-

Open and close the drivers side door.

-

Open and close the passenger door.

Interior Illumination

Interior lights will illuminate continuously if the interior light defeat switch is OFF and any door is OPENED, or if the dimmer switch is ROTATED to
the ON position for interior illumination.

Exit Lighting

Interior lights will ILLUMINATE for 40 seconds when the ignition key is REMOVED from the ignition cylinder.

Power Door LOCK/UNLOCK Function

The BCM is responsible for energizing the drivers door unlock relay. The drivers door unlock relay will be energized whenever the BCM receives a
command from any of the door LOCK/UNLOCK switches.

Lockout Prevention

The lockout prevention feature is to prevent locking the vehicle with the keys in the ignition switch. This feature is activated when the key is in the
ignition switch, any door is OPENED and then the power lock switch is PRESSED. This feature will LOCK the doors then UNLOCK the drivers door.

Audible Warnings

When the BCM determines a driver warning sound is needed, the BCM will sound the chime when applicable.

Key In Reminder

The chime will sound when the ignition switch is not in the RUN or CRANK position, the ignition key is in the ignition key cylinder, and the drivers
door is OPENED.

Head Lamp Reminder

The chime will sound when the headlamp switch is in the PARK LAMP or HEADLAMP position and the ignition switch is in the OFF position or ACC
position.

Seat Belt Reminder

The chime will sound for 8 seconds when the ignition switch is turned from the OFF position to the RUN position and the seat belt is UNFASTENED.
The seat belt indicator on the IPC will also turn ON.

Turn Signal Reminder

The chime will sound when the right or left turn signal is turned ON for more than 0.75 miles. The chime will be synchronous with the turn signal
flasher.

Driver Warning Indicators

The BCM sends requests to the instrument panel cluster (IPC) to turn the IPC indicators ON or OFF. These requests are sent on the Class 2 serial data
line. If the IPC can not communicate with the BCM via Class 2 the IPC will turn the Security telltale ON steady. The list of messages sent by the BCM
to the IPC are as follows:

-

Park Brake

-

Seat Belt

-

High Beam

Exterior Lighting Control

Body Control System Description|Page 1573 > < Body Control System Description|Page 1571