Hombre S Space Cab 2WD V6-4.3L (2000)
The scan tool displays the position of the drivers seatbelt buckle. The scan tool displays YES when the drivers seatbelt is buckled. The BCM uses this
data in controlling the operation of the seatbelt warning chime and the seatbelt indicator.
Input2
Auto Headlamps
The scan tool displays the status of the auto headlamps. The scan tool displays ACTIVE when the auto headlamps are ON.
Cargo Lamp Switch
The scan tool displays the state of the switch. The scan tool displays ON when the cargo lights are requested by activation of the switch.
Courtesy Lamp Relay
The scan tool displays the state of the courtesy lamp relay. The scan tool displays ON when the BCM commands the courtesy lamps ON by providing a
ground for the courtesy lamp relay.
Dimming Potentiometer Input
The scan tool displays the position of the dome lamp switch (thumb wheel) when the park lamps are ON. The scan tool displays ACTIVE when the
dome lamp switch is in its normal position and the park lamps are ON.
Dome Lamp Switch
The scan tool displays the position of the dome lamp switch. The scan tool displays ON when the dome lamp switch is to its full up position past the
detent.
Dome Override Switch
The scan tool displays the position of the dome override switch. The scan tool displays ON when the switch is activated and requesting the BCM to
override the interior lighting.
Flash to Pass Switch
The scan tool displays the position of the flash to pass switch. The scan tool displays ON when the switch is pulled to activate the high beams
momentarily while the switch is held.
Front Fog Lamp Switch
The scan tool displays the position of the front fog lamp switch. The scan tool displays ON when the front fog lamp switch is activated with the park
lamps or headlamps ON.
Headlamp Relay Feedback
The scan tool displays the state of the headlamps. The scan tool displays ON when the headlamp and panel dimmer switch is manually turned to the ON
position. The scan tool also displays ON when the switch is in the AUTO position and the ambient light sensor is in its DARK state.
High Beam Switch
The scan tool displays the position of the high beam switch. The scan tool displays ON when the high beam switch is activated.
Left Turn Signal
The scan tool displays the position of the turn signal switch. The scan tool displays ON when the left turn signal is activated. The BCM uses this data to
activate the turn signal reminder chime after the vehicle has traveled 0.75 miles with the turn signal switch activated.
Park Lamps
The scan tool displays the state of the park lamps. The scan tool displays ON when the park lamps are activated by the BCM or the headlamp switch.
Right Turn Signal
The scan tool displays the position of the turn signal switch. The scan tool displays ON when the right turn signal is activated. The BCM uses this data to
activate the turn signal reminder chime after the vehicle has traveled 0.75 miles with the turn signal switch activated.