Hombre S Space Cab 2WD V6-4.3L (2000)
Compressor Clutch Relay: Service and Repair
Removal Procedure
CAUTION: Refer to Battery Disconnect Caution in Cautions and notes.
1. Disconnect the battery negative cable.
2. Remove the protective cover from the underhood junction block.
3. Remove the compressor relay from the underhood junction block.
Installation Procedure
1. Install the compressor relay to the underhood junction block.
2. Install the protective hood to the underhood junction block.
3. Connect the battery negative cable.
4. Test the circuit operation.
