Hombre S Space Cab 2WD V6-4.3L (2000)
3. If the front (4) of the SRS coil has a centering window (3) and no spring service lock on the back side (1), perform the following steps:
1. Hold the coil assembly with the face up.
2. Rotate the coil hub clockwise until the coil ribbon stops.
3. Rotate the coil hub slowly, counter clockwise until the centering window appears yellow and both arrows (2) line up. This is center position.
4. While holding the coil hub in center position, align the SRS coil assembly with the horn tower and slide onto the steering shaft assembly.
4. If no centering window is present on the front side (3) of the SRS coil assembly, but a spring service lock (1) is on the back side (2), perform the
following steps:
1. Hold the SRS coil assembly with the back side up.
2. While depressing the spring service lock, rotate the coil hub counter clockwise until the coil ribbon stops.
3. Still pressing the spring service lock, rotate the coil hub in the opposite direction 2 1/2 revolutions.
4. Release the spring service lock between locking tabs. The SRS coil is now centered.
5. Align the centered SRS coil assembly with the horn tower and slide onto the steering shaft assembly.
5. For no centering window on the front side (2) of the SRS coil assembly and no spring service lock on the back side (1), perform the following
steps:
1. Hold the coil assembly with the face up.
2. Rotate the coil hub clockwise until the coil ribbon stops.
3. Rotate the coil hub, slowly, counter clockwise, for 2 1/2 revolutions. This is center position.
4. While maintaining the coil hub in center position, align the centered SRS coil assembly with the horn tower and slide onto the steering shaft
