Hombre S Space Cab 2WD V6-4.3L (2000)
Clockspring Assembly / Spiral Cable: Service and Repair
Disassembly and Reassembly
Floor Shift
Disassembly Procedure
1. Remove the upper and lower shrouds.
2. Remove the wire harness assembly (1) from the steering column and the wire harness strap (2).
3. Disconnect the SRS coil assembly connector from the turn signal switch assembly connector.
4. Remove the snap ring (3) from the steering shaft assembly by using snap ring pliers.
5. Remove the SRS coil assembly (2) from the steering shaft assembly.
6. Remove the wave washer (1) from the steering shaft assembly.
Assembly Procedure
1. Align the block tooth on the steering shaft assembly (1) to the 12 o'clock position.
