Hombre S Space Cab 2WD V6-4.3L (2000)
Power Mirror Switch: Service and Repair
Removal Procedure
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notes.
1. Disconnect the negative battery cable.
2. Remove the power accessory switch panel from the armrest. Use a flat-bladed tool in order to carefully pry the cover up at the front leading edge.
3. Disconnect the electrical connectors from the switch.
4. Remove the switches from the switch mounting panel, if necessary.
Installation Procedure
1. Install the switches to the switch mounting panel, if necessary.
2. Connect the electrical connectors to the switch.
3. Install the power accessory switch mounting panel to the armrest. Ensure that the retainers lock into place.
4. Connect the negative battery cable.
