Hombre S Space Cab 2WD V6-4.3L (2000)
NOTE: Refer to Fastener Note in Service Precautions.
Important: The screws used to attach the TP sensor are coated with thread locking adhesive. Clean the attaching screw threads and apply thread
locking material GM P/N 1052624 or equivalent.
2. Install the TP sensor mounting screws.
Tighten: Tighten the screws to 2.0 N.m (15 lb in).
3. Install the throttle body.
4. Connect the TP sensor harness connector.
