Hombre S Space Cab 2WD V6-4.3L (2000)
Secure the lock cylinder in the J 41340.
1. Inspect that the spring retainer is facing up and positioned directly under the punch slots.
2. Push the lock cylinder into the J 41340 (1) until butted with the lock cylinder bezel.
3. Tighten the J 41340 holding screw.
Stake the bezel end of the spring retainer:
1. Hold the flat side of the punch squarely against the face of the lock cylinder bezel.
2. Stake the lock cylinder metal over the spring retainer prong.
Stake the opposite end of the spring retainer:
1. Remove the J 41340 punch.
2. Rotate the J 41340 punch 180 degrees.
3. Hold the J 41340 punch squarely against the end of the punch slot.
4. Stake the lock cylinder metal over the spring retainer prong.
Loosen the J 41340 holding screw.
