isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Crankshaft Position Sensor (CKP) - Difficult Starting|Page 4019 > < Crankshaft Position Sensor (CKP) - Difficult Starting|Page 4017
Page 2
background image

6. Disconnect the wires from the solenoid.

7. Remove the starter mounting bolts by accessing them below the right wheel house panel.

8. Remove the starter from the vehicle. Note the location of the shims if equipped.

Installation Procedure

Crankshaft Position Sensor (CKP) - Difficult Starting|Page 4019 > < Crankshaft Position Sensor (CKP) - Difficult Starting|Page 4017