Hombre S Space Cab 2WD V6-4.3L (2000)
7. Disconnect the relay rod from the idler arm using J 24319-B.
8. Remove the relay rod.
9. Inspect the following components:
^
The threads on the tie rod for damage
^
The threads on the tie rod end for damage
^
The ball stud threads for damage
^
The ball stud seals for excessive wear
10. Clean the threads on the ball stud and nut.
Installation Procedure
Tools Required
^
J 29193 Steering Linkage Installer (12 mm)
^
J 29194 Steering Linkage installer (14 mm)
1. Install the relay rod ball stud to the idler arm. Ensure that the seal is on the stud.
Notice: Refer to Fastener Notice In Service Precautions.
