Hombre S Space Cab 2WD V6-4.3L (2000)
Power Steering Line/Hose: Service and Repair
Power Steering Pressure Hose Replacement
Removal Procedure
Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
1. Raise and suitably support the vehicle.
2. Remove the steering linkage shield, if equipped.
3. Install a drain pan under the vehicle.
4. Disconnect the pressure hose from the power steering pump.
5. Lower the vehicle.
6. Remove the air cleaner assembly.
7. Disconnect the power steering gear pressure hose from the power steering gear.
8. Remove the power steering gear pressure hose from the vehicle.
Installation Procedure
Notice: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier.
Failure to follow these procedures could result in component damage.
1. Install the power steering gear pressure hose to the vehicle.