isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Power Steering Pressure Hose Replacement|Page 4131 > < Power Steering Pressure Hose Replacement
Page 2
background image

Notice:  Refer to Fastener Notice In Service Precautions. 

2. Connect the power steering gear pressure hose to the power steering gear. 

Tighten
Tighten the power steering gear pressure hose to the power steering gear to 30 Nm (22 ft. lbs.).   

3. Install the air cleaner assembly.  
4. Raise the vehicle. 

5. Connect the power steering gear pressure hose to the power steering pump. 

Tighten
Tighten the power steering gear pressure hose to the power steering pump to 25 Nm (18 ft. lbs.).  

6. Remove the drain pan from under the vehicle. 
7. Install the steering linkage shield, if equipped. 
8. Lower the vehicle. 
9. Bleed the power steering system.  Refer to Steering, Service and Repair, Bleeding Power Steering System. 

Power Steering Pressure Hose Replacement|Page 4131 > < Power Steering Pressure Hose Replacement