Hombre S Space Cab 2WD V6-4.3L (2000)
Tighten the lower steering column trim cover retaining screws to 3.5 Nm (31 inch lbs.).
6. Install the steering wheel.
7. Enable the SRS system. Refer to Restraint Systems.
Tilt Column
Removal Procedure
Caution: Refer to SRS Handling Caution in Service Precautions.
1. Disable the SRS system. Refer to Restraint Systems.
2. Remove the steering wheel
3. Remove the tilt steering column lever (1) from steering column (2).
4. Remove the screws that retain the lower steering column trim cover to the steering column.
5. Remove the lower steering column trim cover.
6. Tilt the trim cover down and slide it back in order to disengage the locking tabs.
7. Remove the screws that retain the upper steering column trim cover to the steering column.
8. Remove the ignition lock cylinder.
9. Remove the upper steering column trim cover.
Installation Procedure