Hombre S Space Cab 2WD V6-4.3L (2000)
Important: The shift lever seal must seat in the grooves of the shrouds.
8. Install the lower shroud onto the upper shroud.
9. Match the tab slots on the lower shroud with the locking tabs on the upper shroud.
10. Tilt the lower shroud up.
11. Slide the lower shroud forward until the locking tabs snap into the tab slots.
12. Screw the 2 pan head tapping screws (1) into the lower shroud (2).
Tighten
Tighten the 2 pan head tapping screws to 3.5 Nm (31 inch lbs.).
13. Remove J 42640 from the lower shroud of the steering column.
14. Remove the steering column and J 41352 from the vise.
Disassemble
Disassembly Procedure
