Hombre S Space Cab 2WD V6-4.3L (2000)
1. Install the upper shroud (2) onto the steering column.
Notice: Refer to Fastener Notice In Service Precautions.
2. Screw the 2 TORX (R) head screws (1) into the upper shroud (2).
Tighten
Tighten the 2 TORX (R) head screws to 1.5 Nm (13 inch lbs.).
3. Install the shroud protector (1) onto the lower shroud (2).
4. Install the shift lever seal (2) onto the shift lever assembly (4).
5. Install the shift lever assembly (4).
6. Install the shift lever screw (3) into the shift lever assembly (4).
Tighten
Tighten the screw to 1.5 Nm (13 inch lbs.).
7. Slide the shift lever seal (2) down the shift lever assembly (4).
