Hombre S Space Cab 2WD V6-4.3L (2000)
7. Slide the ignition and key alarm switch assembly (2) out of the lock module assembly (1) by releasing the tabs.
8. Let the ignition and key alarm switch assembly (2) hang freely.
9. Remove the 3 pan head tapping screws (1) from the lock module assembly (2).
Important: The lock bolt assembly (4) is under slight spring tension from the lock bolt spring (3). Hold the lock bolt (4) in place while removing
the lock module assembly (2).
10. Remove the lock module assembly (2) and the lock bolt assembly (4) from the steering column housing assembly (5).
11. Remove the lock bolt spring (3) from the lock bolt assembly (4).
Assemble
Assembly Procedure
Tools Required
J 41396 Park Lock Cable Pliers
1. Install the lock bolt spring (3) into the steering column housing assembly (5).