Hombre S Space Cab 2WD V6-4.3L (2000)
Steering Column Lock: Service and Repair
Tilt Column
Disassemble
Disassembly Procedure
Tools Required
J 41396 Park Lock Cable Pliers
1. Remove the upper tilt head components.
2. Remove the steering column lock cylinder set.
3. Remove the park lock cable assembly (1) from the lock module assembly.
1. Place the steering column lock cylinder set into the off position.
2. Place the shift lever clevis into the park position.
3. Use a small blade to push against the locking tab on the end of the park lock cable assembly (1).
4. Disconnect the park lock cable assembly (1) from the lock module assembly.
4. Rotate the key alarm connector (1) 90 degrees.
5. Pull the key alarm connector (1) out of the lock module assembly (2).
6. Remove the passkey connector from the lock module assembly (2).
