Hombre S Space Cab 2WD V6-4.3L (2000)
3. Install the lock bolt assembly (4) into the steering column tilt head assembly (5).
4. Push the lock bolt assembly (4) into the steering column tilt head assembly (5) until the lock bolt assembly is flush with the steering column tilt
head assembly (5).
5. Align the lock module assembly (2) with the steering column tilt head assembly (5).
Notice: Refer to Fastener Notice In Service Precautions.
6. Screw the 3 pan head tapping screws (1) into the lock module assembly (2).
Tighten
Tighten the 3 pan head tapping screws to 7 Nm (62 inch lbs.).
7. Slide the ignition and key alarm switch assembly (3) into the lock module assembly (1).
8. Push the key alarm connector (1) into the lock module assembly (2).
9. Rotate the key alarm connector (1) 90 degrees so that the key alarm connector (1) locks into place.
10. Install the passkey connector into the lock module assembly (2).
