isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Intermediate Steering Shaft|Page 4229 > < Intermediate Steering Shaft|Page 4227
Page 9
background image

3. Install the shield to the lower intermediate shaft. 
4. Install the air cleaner assembly. 

5. Unlock the steering column by removing J 42640 from the steering column lower trim cover access hole. 

Seal Replacement

Removal Procedure 

Notice:  The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column or
intermediate shaft from the steering gear. Failure to do so will cause the coil assembly in the steering column to become uncentered which will cause
damage to the coil assembly. 

1. Remove the lower intermediate shaft. 
2. Remove the intermediate shaft seal from the vehicle. 

Installation Procedure 

Intermediate Steering Shaft|Page 4229 > < Intermediate Steering Shaft|Page 4227