Hombre S Space Cab 2WD V6-4.3L (2000)
6. Remove the inner boot seal (4).
7. Remove the steering shaft seal (3) from the adapter and bearing assembly (1).
8. Remove the shaft seal retainer (2) from the adapter and bearing assembly (1).
9. Remove the adapter and bearing assembly (1) from the steering shaft assembly.
10. Remove the 2 pivot pins (3) from the steering column tilt head assembly (1) by using J 21854-1.
11. Install the tilt lever into the steering column tilt head assembly (1).
12. Pull back on the tilt lever and at the same time pull the steering column tilt head assembly (1) down and away from the steering column.
13. Remove the steering column tilt head assembly (1) with the steering shaft assembly from the steering column support assembly (2).
14. Remove the tilt lever.
