Hombre S Space Cab 2WD V6-4.3L (2000)
Tie Rod: Description and Operation
^
There are two tie rod assemblies. Each tie rod assembly consists of the following components:
-
Sleeve
-
Two clamps
-
Two tie rod ends
^
The two tie rod ends are threaded into the sleeve and secured with the clamps.
^
The right and left hand threads are used for the following components:
-
Toe-in adjustments
-
Steering gear centering
^
Before any service is performed, note the following items:
-
Position of the tie rod adjuster tube
-
Direction from which the bolts are installed
^
The tie rod adjuster components may be rusted. If the torque required to remove the nut from the bolt exceeds 9 Nm (62 inch lbs.), perform the
following steps:
-
Replace the nuts.
-
Rotate the clamps until they move freely.
^
Install all parts, with the correct part number, in the proper position.
^
All of the procedures for the following items apply to the left and the right sides:
-
Alignment
-
Adjustment
-
Assembly