Hombre S Space Cab 2WD V6-4.3L (2000)
1. Snap the electric park lock (2) onto the lock module assembly (1).
2. Install the black connector into the electric park lock (2).
3. Install the upper shroud (2) onto the steering column.
Notice: Refer to Fastener Notice In Service Precautions.
4. Screw the 2 TORX (R) head screws (1) into the upper shroud (2).
Tighten
Tighten the 2 TORX (R) head screws to 1.5 Nm (13 inch lbs.).
5. Install the lower shroud onto the upper shroud in the following way:
1. Match the tab slots on the lower shroud with the locking tabs on the upper shroud.
2. Tilt the lower shroud up.
3. Slide the lower shroud forward until the locking tabs snap into the tab slots.
