Hombre S Space Cab 2WD V6-4.3L (2000)
Shifter A/T: Service and Repair
Linear Shift Assembly Replacement
Removal and Installation
Removal Procedure
Tools Required
^
J 41396 Park Lock Cable Pliers
Caution: Refer to SRS Handling Caution in Service Precautions.
1. Disable the SRS system. Refer to Restraint Systems.
2. Remove the automatic transmission shift lock actuator.
3. Disconnect the park lock cable assembly (1).
4. Ensure that the steering column lock cylinder set is in the off-lock position.
5. Insert a small screwdriver into the slot on the lock module assembly and push against the locking tab in order to remove.
6. Remove 3 flat head 6 lobed socket tap screws from the linear shift assembly.
7. Remove the linear shift assembly from the steering column.
8. In order to disassemble the linear shift assembly, proceed to the next step.
