Hombre S Space Cab 2WD V6-4.3L (2000)
17. Remove the 3 flat head tapping screws from the support bracket for the gear shift lever assembly.
18. Remove the gear shift lever assembly support bracket from the steering column support assembly.
Installation Procedure
Tools Required
^
J 41396 Park Lock Cable Pliers
Important: Lubricate all of the moving parts of the linear shift assembly with synthetic grease.
1. Install the gear shift lever assembly support bracket onto the steering column support assembly.
Notice: Refer to Fastener Notice In Service Precautions.
2. Screw the 3 flat head tapping screws into the gear shift lever assembly.
Tighten
Tighten the 3 flat head tapping screws to 10 Nm (89 inch lbs.).
3. Insert the cam bushing (2) into the cable shift cam assembly (1).
4. Install the cable shift cam assembly (1) into the support bracket for the gear shift lever assembly.
5. Screw the hexagon flange head bolt into the cable shift cam assembly (1).