Hombre S Space Cab 2WD V6-4.3L (2000)
13. Connect the park lock cable assembly (1) to the lock module assembly in the following way:
^
Place the steering column lock cylinder set into the off position.
^
Place the shift lever clevis into the park position.
^
Press the locking tab on the end of the park lock cable assembly (1) into the slot in the lock module assembly.
14. Adjust the park lock cable assembly.
1. Use the shift lever clevis to put the column in the park position.
2. Put the ignition switch in the off-lock position. Remove the key.
3. Unlock the adjuster ring (1) on the park lock cable assembly with J 41396.
4. Pull on the cable until the park lock latch contacts the shift lever clevis.
Release the cable.
5. Lock the adjuster ring (1) securely in place on the park lock cable assembly with J 41396.
15. Inspect the park lock cable assembly.
1. Put the lock cylinder in the off-lock position. The shift lever clevis should not be able to shift out of the park position.
2. Turn the key to the run position and put the shift lever clevis in the neutral position.
3. With the shift lever clevis in the neutral position the lock cylinder should not be able to go into the off-lock position.
4. Put the shift lever clevis into the park position.
5. Put the lock cylinder in the off-lock position and then remove the key.
