Hombre S Space Cab 2WD V6-4.3L (2000)
8. Install the shift lever clevis (1) into the support bracket for the gear shift lever assembly.
9. Install the ball actuator assembly (2) onto the gear shift lever assembly.
10. Install the hexagon flange head bolt into the gear shift lever assembly.
Tighten
Tighten the hexagon flange head bolt to 18 Nm (14 ft. lbs.).
11. In order to install the linear shift assembly as an assembly, proceed to the next step.
12. Install the linear shift assembly and secure using 3 flat head 6 lobed socket tap screws.
Tighten
Tighten the 3 flat head 6 lobed socket tap screws to 10 Nm (89 inch lbs.).
13. Connect the park lock cable assembly (1) to the lock module assembly using the following steps:
^
Place the steering column lock cylinder set into the off position.
^
Place the shift lever clevis into the park position.
^
Press the locking tab on the end of the park lock cable assembly (1) into the slot in the lock module assembly.
