Hombre S Space Cab 2WD V6-4.3L (2000)
Important: Install anew universal joint whenever a slip joint or companion flange is serviced.
2. Lubricate the slip joint.
3. Install the yoke and cross assembly onto the pinion flange.
4. Align the reference marks on the pinion flange and the propeller shaft rear yoke. Seat the yoke properly.
5. Install the retainers.
6. Install the bolts into the pinion flange.
^
Tighten the rear pinion flange bolts to 20 Nm (15 ft. lbs.) for 2.2L engines.
^
Tighten the bolts to 45 Nm (33 ft. lbs.) for 4.3L engines.
